CBE Torx 27 Inch Review: A Target Bar That Earns Its Length
Buy the CBE Torx 27 inch if you shoot target or 3D and want the pin to sit still at 50 yards, because length is the only thing that produces that effect and a stiff, thin, high modulus bar produces it without adding needless weight. Skip it entirely for hunting, because 27 inches in front of a bow is unmanageable in a blind, a stand or thick cover.
High modulus carbon at .75 inch diameter, with weights included.
CBE Torx Target Carbon Stabilizer, 27 inch
Under $250
A 27 inch high modulus carbon target bar with stainless weights and a vibration reducing design.
Check price on AmazonSpecifications
| Length | 27 inches, with 10, 12, 15, 30 and 33 inch options in the range |
|---|---|
| Material | High modulus, ultra stiff, lightweight carbon |
| Diameter | .75 inch micro diameter |
| Weights | 1 oz black nitride stainless steel weights included on each stabilizer |
| Design | Vibration reducing |
| Budget | Under $250 |
Specifications above come from CBE's published product features on the current listing. Treat pricing as approximate, since Amazon pricing moves.
What it does well
- Length is leverage, and 27 inches is where a pin genuinely stops wandering at long distance.
- High modulus carbon means stiffness without mass, which is the whole engineering argument for a carbon bar over an aluminium one.
- A .75 inch diameter presents less surface to a crosswind than a fat bar, which matters on an outdoor field course.
- Stainless weights are included rather than sold separately, so the bar is usable out of the box.
- CBE offers the same bar in six lengths, so a matched back bar or a shorter setup stays within one system.
Where it falls short
- It is completely wrong for hunting. This is not a criticism of the bar, it is a category boundary that people cross and regret.
- A long carbon bar is vulnerable in transit. It needs a case that supports it, or it needs to come off the bow to travel.
- The listing does not publish the bar's own weight, so if mass matters to your setup, ask CBE for the figure.
- Under $250 before you add a back bar, a side bar or a V-bar, and target setups rarely stop at one bar.
- A long front bar alone can make a bow nose-heavy. Balance usually needs a rear bar to go with it, which is more money.
What owners report
Published owner reviews of the Torx line consistently describe it as stiff, well finished and quiet, which are the three things asked of a target bar. Owners of long CBE bars typically report a visibly steadier float at 50 and 60 yards, which is the distance where a stabilizer stops being a nice idea and starts being the difference between scores. Complaints are rare and mostly about needing to buy more weights to get the balance right, which is true of every target bar.
The important thing to understand before buying is what length is actually doing. A stabilizer resists rotation, and resistance scales with how far the mass sits from the grip. That is why a 27 inch bar with light weights outperforms a 6 inch bar with heavy ones, and why hunting bars are a compromise rather than a smaller version of the same idea. Our hunting versus target stabilizer comparison sets out the trade in detail, and the Bee Stinger Sport Hunter Xtreme is the hunting-length answer from the same category.
Owners also raise a practical point that is easy to overlook: a bar this long changes how the bow is stored and transported. A case that fits a bare hunting bow will not fit a bow with a 27 inch bar attached, and carbon does not appreciate being levered against a case wall. Plan to remove it, or buy a case that fits it.
If long-distance steadiness is what you are chasing, the sight and the sight tape matter as much as the bar. Our sight tape calculator builds a yardage tape from your arrow speed so your dialled distances are honest, and the stabilizer guide covers what to pair it with.
Who it suits
- Target and 3D archers shooting known distances at 40 yards and beyond.
- Archers who already have a tuned bow and want the last of the steadiness.
- Anyone building a matched front and rear bar target setup.
Who should skip it
- Bowhunters, without exception. A 27 inch bar and a treestand do not coexist.
- Archers who have not yet sorted grip torque or draw length.
- Anyone travelling frequently with a bow that stays assembled.
Alternatives worth considering
Bee Stinger Sport Hunter Xtreme Stabilizer, 8/6 inch
Under $250
A paired 8 inch front and 6 inch back setup that balances a loaded hunting bow without turning it into something you cannot carry. The right buy if any of your shooting is from a stand.
Check price on AmazonBee Stinger Pro Hunter MAXX Stabilizer, 8 inch
Under $100
A single quality 8 inch bar at under half the price. It gives you most of the vibration damping and some of the steadiness without committing to a full target setup.
Check price on AmazonTrophy Ridge Static Stabilizer, 3 inch
Under $50
For archers who want vibration damping and nothing else, at a tenth of the cost. It does not steady a pin at distance and does not pretend to.
Check price on AmazonKeep reading
- Hunting vs target stabilizer
- Best bow stabilizers
- Bee Stinger Sport Hunter Xtreme review
- Sight tape calculator
This review draws on published specifications, manufacturer figures and the consensus of verified owner reviews. We have not tested this product ourselves, and we say so rather than implying otherwise. As an Amazon Associate we earn from qualifying purchases.
Frequently asked questions
How long should a target stabilizer be?
Most target archers run somewhere between 27 and 33 inches on the front, with a shorter rear bar to balance it. Longer resists rotation better because the mass sits further from the grip. The practical ceiling is what you can hold up for a full round without fatigue, and what your class rules allow, so check your organisation's equipment rules before buying at the long end.
Can I hunt with a 27 inch stabilizer?
In an open field blind with a rail, technically. In any realistic hunting situation, no. It catches branches, it fouls a stand, and it makes a bow awkward to raise slowly. Hunting bars sit around 6 to 10 inches for exactly this reason. Our hunting versus target stabilizer comparison explains what you give up going short.
Do I need a back bar with a long front bar?
Usually, yes. A long front bar makes the bow nose-heavy and does nothing about the sideways pull of a sight and any other mounted weight. A rear bar restores balance and lets the bow sit level on its own. Target setups almost always run both, which is why a V-bar mount is a common addition.
Is carbon better than aluminium for a stabilizer?
For a long bar, generally yes. High modulus carbon gives stiffness with low mass, so the bar resists bending while the weight you add sits where you chose to put it rather than in the tube itself. Aluminium is cheaper and perfectly reasonable in short hunting lengths, where stiffness is not the limiting factor.
How much weight should I put on the end?
Start with what is included and add in small steps, shooting after each change. The aim is a pin that floats steadily and settles back on target after the shot, not the heaviest setup you can hold. Too much weight shows up as fatigue late in a round, which costs more points than a slightly less steady float.
How we choose: we compare published manufacturer specifications, verified owner reviews, and pro shop guidance. We do not test gear in person. Draw weight and arrow spine affect safety, so follow your bow manufacturer's specifications and have setup work checked by a qualified pro shop.
